P0041 - Downstream Oxygen Sensors Swapped From Bank To Bank

The PCM sees the oxygen-sensor signals assigned to the wrong bank, usually after sensor replacement or harness cross-connection.

Code first. Confirm symptoms and checks before pricing parts.

Explore Related Systems

Compare nearby repair families.

Common Next Steps

Turn the code into the next check.

Related Inspection

Code Overview

The PCM sees the oxygen-sensor signals assigned to the wrong bank, usually after sensor replacement or harness cross-connection.

Common Causes

• Sensor connectors swapped during service
• Harness routing error
• Incorrect sensor installation

Diagnostic Steps

1. Trace the upstream and downstream sensor connectors bank to bank
2. Verify sensor connectors were not crossed during exhaust service
3. Confirm the scan-tool bank labeling matches the installed sensors

Likely Repairs & Cost Guides

Confirm the repair path before pricing parts.

Related OBD Codes

Browse nearby codes when systems overlap.

Next Steps

Move from code to checks, then estimate.