P0050 - HO2S Heater Control Circuit (Bank 2 Sensor 1)

The heater circuit for the upstream oxygen sensor on bank 2 is not operating correctly.

Code Overview

The heater circuit for the upstream oxygen sensor on bank 2 is not operating correctly.

Common Causes

• Faulty oxygen sensor heater
• Open or shorted wiring
• Blown fuse
• Connector damage

Diagnostic Steps

1. Inspect upstream O2 sensor wiring on bank 2
2. Check heater fuse
3. Verify power and ground to the heater circuit
4. Check for melted or rubbed-through wires

Likely Repairs & Cost Guides

Use test results to confirm the fault before pricing the repair.

Related OBD Codes

Browse the closest code-family pages when the same fault pattern often shows up nearby.

Next Steps

Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.