P0087 - Fuel Rail/System Pressure - Too Low
The PCM detected a fuel-pressure control fault or leak condition that can cause hard starting, reduced power, or poor fuel delivery.
Code first. Confirm symptoms and checks before pricing parts.
Explore Related Systems
Compare nearby repair families.
Common Next Steps
Turn the code into the next check.
Check coil boots, carbon tracking, and whether the miss follows a swap.
Inspect gap, fouling, wear, oil, coolant, and plug-well condition.
Move to injector balance, pulse, or leak-down checks if the misfire stays.
Use compression or leak-down testing when spark and fuel checks do not move the fault.
Code Overview
The PCM detected a fuel-pressure control fault or leak condition that can cause hard starting, reduced power, or poor fuel delivery.
Common Causes
- Failing regulator, valve, or pump
- Restricted fuel supply or leak
- Wiring or connector issue
- Sensor feedback fault
Diagnostic Steps
- Check actual fuel pressure against the requested value
- Inspect regulator, valve, and pump connectors
- Look for leaks, restrictions, or aerated fuel
- Verify power, ground, and control signals before replacing the pump or regulator
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.