TorqueMech OBD Code Guide
P0119 - Engine Coolant Temperature Circuit Intermittent
The coolant temperature sensor signal is intermittent.
Code Overview
The coolant temperature sensor signal is intermittent.
Common Causes
- Loose coolant temperature sensor connector
- Failing ECT sensor dropping in and out
- Broken or chafed wiring in the ECT circuit
- Coolant intrusion or corrosion in the connector
Symptoms
- Temperature gauge or scan data jumps around
- Cooling fans may cycle oddly
- Intermittent rich or lean cold-start behavior
Diagnostic Steps
- Wiggle-test the ECT connector and harness while watching scan data
- Inspect the connector for corrosion or coolant intrusion
- Check reference voltage, ground, and signal integrity at the sensor
- Compare ECT behavior to actual engine temperature during warm-up
Repair Difficulty
Easy
General difficulty estimate for the most common repair path.
Likely Repairs & Cost Guides
Use test results to confirm the fault before pricing the repair.
Engine coolant temperature sensor replacement
Estimator-ready next step for a confirmed repair path.
Related OBD Codes
Browse the closest code-family pages when the same fault pattern often shows up nearby.
Next Steps
Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.