P0153 - O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)

An oxygen sensor circuit issue was detected.

Code Overview

An oxygen sensor circuit issue was detected.

Common Causes

• Aging upstream oxygen sensor on bank 2 sensor 1
• Exhaust leak affecting the sensor reading
• Sensor contamination slowing response
• Rich or lean running condition affecting switching

Symptoms

• Check-engine light with unstable fuel control
• Hesitation or light surge
• Failed emissions readiness or inspection

Diagnostic Steps

1. Watch the bank 2 sensor 1 switching rate after the engine is fully warm
2. Check for exhaust leaks ahead of the sensor
3. Review fuel trims and misfire data before replacing the sensor
4. Confirm the sensor is slow to respond under changing fuel conditions

Repair Difficulty

Moderate

General difficulty estimate for the most common repair path.

Likely Repairs & Cost Guides

Use test results to confirm the fault before pricing the repair.

Related OBD Codes

Browse the closest code-family pages when the same fault pattern often shows up nearby.

Next Steps

Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.