P0160 - O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)

An oxygen sensor circuit issue was detected.

Code Overview

An oxygen sensor circuit issue was detected.

Common Causes

• Failed downstream oxygen sensor on bank 2 sensor 2
• Damaged wiring or poor terminal contact in the sensor circuit
• Exhaust leak affecting the downstream reading
• Sensor stuck inactive because of a separate fueling or catalyst problem

Symptoms

• Check-engine light with little or no drivability change
• Failed emissions readiness or inspection
• Downstream O2 data may stay flat on the scan tool

Diagnostic Steps

1. Check for exhaust leaks and catalyst-related codes first
2. Inspect the bank 2 sensor 2 wiring and connector near the exhaust
3. Watch downstream sensor activity on the scan tool after warm-up
4. Verify power, ground, and signal integrity before replacing the sensor

Repair Difficulty

Moderate

General difficulty estimate for the most common repair path.

Likely Repairs & Cost Guides

Use test results to confirm the fault before pricing the repair.

Related OBD Codes

Browse the closest code-family pages when the same fault pattern often shows up nearby.

Next Steps

Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.