P0175 - System Too Rich (Bank 2)

The engine is running rich on bank 2.

Treat the code as the starting point: compare symptoms, likely causes, and repair paths before pricing parts or moving into an estimate.

Code Overview

The engine is running rich on bank 2.

Common Causes

• Leaking injector on bank 2
• Fuel pressure too high or regulator fault
• Dirty or skewed mass air flow sensor
• Coolant temperature sensor reading colder than actual
• Restricted intake airflow

Symptoms

• Fuel smell from the exhaust
• Rough idle or loaded-up running
• Poor fuel economy or black soot at the tailpipe

Diagnostic Steps

1. Check short- and long-term fuel trims to confirm the rich condition on bank 2
2. Inspect for leaking injectors or fuel odor and check fuel pressure
3. Review MAF and coolant-temperature readings for values that do not make sense
4. Inspect the air filter and intake tract for restriction

Repair Difficulty

Moderate

General difficulty estimate for the most common repair path.

Likely Repairs & Cost Guides

Use symptoms, scan data, and quick checks to confirm the likely repair path before pricing parts. The estimator helps compare repair paths before replacing anything unnecessarily.

Related OBD Codes

Browse nearby code-family pages when the same fault pattern overlaps across systems, such as misfire, lean fuel trim, EVAP sealing, cooling, or charging faults.

Next Steps

Move from code lookup to diagnosis, then estimate the likely repair only after symptoms, causes, and checks point to the same path.