P0335 - Crankshaft Position Sensor A Circuit Malfunction

Crankshaft position signal problem detected.

Code Overview

Crankshaft position signal problem detected.

Common Causes

• Sensor failure
• Wiring issue
• Reluctor/ring issue

Diagnostic Steps

1. Check for no-start/stall symptoms
2. Inspect wiring near crank pulley/bellhousing
3. Check sensor signal on scan tool

Likely Repairs & Cost Guides

Use test results to confirm the fault before pricing the repair.

Related OBD Codes

Browse the closest code-family pages when the same fault pattern often shows up nearby.

Next Steps

Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.