TorqueMech OBD Code Guide
P0362 - Ignition Coil L Primary/Secondary Circuit
The ECM detected a fault in ignition coil L primary or secondary circuit.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Explore Related Systems
Compare nearby repair families.
Common Next Steps
Turn the code into the next check.
Inspect ignition coils
Check coil boots, carbon tracking, and whether the miss follows a swap.
Check spark plugs
Inspect gap, fouling, wear, oil, coolant, and plug-well condition.
Verify injector operation
Move to injector balance, pulse, or leak-down checks if the misfire stays.
Check compression if needed
Use compression or leak-down testing when spark and fuel checks do not move the fault.
Code Overview
The ECM detected a fault in ignition coil L primary or secondary circuit.
Common Causes
- Failed ignition coil L
- Damaged wiring or connector at coil L
- Driver circuit fault
Diagnostic Steps
- Inspect the coil L connector and wiring
- Check coil power, ground, and trigger operation
- Confirm the fault follows the coil before replacing parts
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.