TorqueMech OBD Code Guide
P0388 - Crankshaft Position Sensor B High Input
The ECM detected a crankshaft position sensor B high input fault.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Code Overview
The ECM detected a crankshaft position sensor B high input fault.
Common Causes
- Failed crankshaft position sensor
- Damaged wiring or connector
- Reluctor or timing problem affecting the signal
Diagnostic Steps
- Inspect the sensor connector and harness
- Check RPM signal during crank and run
- Look for timing or reluctor issues if the signal is unstable
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.