TorqueMech OBD Code Guide
P0396 - Camshaft Position Sensor A Range/Performance (Bank 2)
The ECM detected a camshaft position sensor A range/performance fault on bank 2.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Code Overview
The ECM detected a camshaft position sensor A range/performance fault on bank 2.
Common Causes
- Failed camshaft position sensor
- Damaged wiring or connector
- Timing issue affecting signal quality
Diagnostic Steps
- Inspect the sensor connector and harness routing
- Compare cam and crank signal behavior if supported
- Check for timing-related faults before replacing parts
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.