P0410 - Secondary Air Injection System Malfunction

Secondary air injection did not operate as expected.

Code Overview

Secondary air injection did not operate as expected.

Common Causes

• Secondary air pump failure
• Relay or fuse problem in the air-injection circuit
• Stuck check valve or blocked air passage
• Vacuum control fault on vacuum-operated systems

Symptoms

• Check-engine light after cold starts
• Usually little or no drivability complaint once warm
• Failed emissions readiness or inspection

Diagnostic Steps

1. Listen for secondary air pump operation on a cold start
2. Check the related fuse, relay, and power supply to the pump
3. Inspect the air hoses and check valves for blockage or heat damage
4. Look for exhaust backflow or water intrusion that may have damaged the pump

Repair Difficulty

Moderate

General difficulty estimate for the most common repair path.

Likely Repairs & Cost Guides

Use test results to confirm the fault before pricing the repair.

Related OBD Codes

Browse the closest code-family pages when the same fault pattern often shows up nearby.

Next Steps

Move from the code to a diagnosis path, then into repair pricing once the fault is confirmed.