TorqueMech OBD Code Guide
P0426 - Catalyst Temperature Sensor Range/Performance (Bank 1 Sensor 1)
The catalyst temperature sensor signal on bank 1 sensor 1 is outside the expected range.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Explore Related Systems
Compare nearby repair families.
Common Next Steps
Turn the code into the next check.
Inspect ignition coils
Check coil boots, carbon tracking, and whether the miss follows a swap.
Check spark plugs
Inspect gap, fouling, wear, oil, coolant, and plug-well condition.
Verify injector operation
Move to injector balance, pulse, or leak-down checks if the misfire stays.
Check compression if needed
Use compression or leak-down testing when spark and fuel checks do not move the fault.
Related Inspection
Code Overview
The catalyst temperature sensor signal on bank 1 sensor 1 is outside the expected range.
Common Causes
- Aging catalyst
- Exhaust leak ahead of the catalyst or sensor
- Sensor or wiring fault
- Upstream fueling or misfire problem
Diagnostic Steps
- Fix any active misfire or fueling codes first
- Check for exhaust leaks ahead of the converter
- Compare sensor data before replacing catalyst parts
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.