TorqueMech OBD Code Guide
P0467 - Purge Flow Sensor Sensor Low Input
The ECM detected a purge-flow sensor sensor low input fault.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Explore Related Systems
Compare nearby repair families.
Common Next Steps
Turn the code into the next check.
Smoke test EVAP system
Use smoke testing when the leak source is not obvious.
Verify purge sealing
Check purge command and sealing before replacing the valve.
Check vent operation
Command the vent valve and inspect canister-side blockage or contamination.
Related Inspection
Code Overview
The ECM detected a purge-flow sensor sensor low input fault.
Common Causes
- Failed purge flow sensor
- Damaged wiring or connector
- Restriction or leak in the EVAP system
Diagnostic Steps
- Inspect the sensor connector and nearby EVAP lines
- Check live data for a stable purge-flow reading
- Use smoke or flow testing if the EVAP system is suspect
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.