TorqueMech OBD Code Guide
P0557 - Brake Booster Pressure Sensor Sensor Low Input
The ECM detected a brake booster pressure sensor sensor low input fault.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Common Next Steps
Turn the code into the next check.
Measure pads and rotors
Confirm thickness, scoring, heat spots, and inner/outer wear.
Inspect caliper movement
Check slide pins, piston movement, hose restriction, and drag.
Check hub runout/play
Use when vibration or ABS evidence overlaps brake complaints.
Related Inspection
Code Overview
The ECM detected a brake booster pressure sensor sensor low input fault.
Common Causes
- Failed pressure sensor
- Vacuum or hydraulic issue at the booster
- Damaged wiring or connector
Diagnostic Steps
- Inspect the sensor connector and harness
- Check booster vacuum or pressure supply
- Compare sensor data to actual brake-assist behavior
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.