P0624 - Fuel Cap Lamp Control Circuit

The ECM detected a fault in the fuel-cap lamp control circuit.

Treat the code as the starting point: compare symptoms, likely causes, and repair paths before pricing parts or moving into an estimate.

Code Overview

The ECM detected a fault in the fuel-cap lamp control circuit.

Common Causes

• Control module, relay, sensor, or actuator fault
• Damaged wiring or connector
• Calibration or power-supply issue

Diagnostic Steps

1. Inspect related connectors, power feeds, and grounds
2. Check supporting scan data and companion codes
3. Confirm the control circuit before replacing the module or actuator

Likely Repairs & Cost Guides

Use symptoms, scan data, and quick checks to confirm the likely repair path before pricing parts. The estimator helps compare repair paths before replacing anything unnecessarily.

Related OBD Codes

Browse nearby code-family pages when the same fault pattern overlaps across systems, such as misfire, lean fuel trim, EVAP sealing, cooling, or charging faults.

Next Steps

Move from code lookup to diagnosis, then estimate the likely repair only after symptoms, causes, and checks point to the same path.