TorqueMech OBD Code Guide
P0694 - Cooling Fan 2 Control Circuit High
Cooling fan 2 control circuit is higher than expected.
Code first. Confirm symptoms and checks before pricing parts.
Read code pattern
Check likely system
Estimate after confirmation
Explore Related Systems
Compare nearby repair families.
Common Next Steps
Turn the code into the next check.
Pressure test cooling system
Confirm external leaks, cap behavior, and pressure loss before parts.
Inspect thermostat
Compare warm-up, scan temperature, and hose temperature behavior.
Verify radiator fan operation
Check fan command, AC-load response, fuses, relays, and airflow.
Related Inspection
Code Overview
Cooling fan 2 control circuit is higher than expected.
Common Causes
- Relay, module, sensor, or control-circuit fault
- Damaged wiring or connector
- Power-supply or ground issue
Diagnostic Steps
- Inspect related relay, connector, and harness condition
- Check power, ground, and control signal where applicable
- Review companion codes before replacing parts
Related OBD Codes
Browse nearby codes when systems overlap.
Next Steps
Move from code to checks, then estimate.