P0940 - Hydraulic Oil Temperature Sensor Circuit High

The control module detected a fault related to hydraulic oil temperature sensor circuit high. Diagnose the circuit, command, feedback, and mechanical conditions before replacing parts.

Code first. Confirm symptoms and checks before pricing parts.

Code Overview

The control module detected a fault related to hydraulic oil temperature sensor circuit high. Diagnose the circuit, command, feedback, and mechanical conditions before replacing parts.

Common Causes

• transmission hydraulic temperature circuit wiring or connector concern
• transmission hydraulic temperature component fault
• Low system voltage, poor ground, or module communication issue
• Mechanical or hydraulic problem affecting the monitored operation

Diagnostic Steps

1. Confirm the code, freeze-frame data, and whether related codes set at the same time
2. Inspect fluid level/condition where applicable and check for visible leaks or damage
3. Inspect wiring, terminals, grounds, and connectors before replacing the component
4. Compare commanded vs. actual scan-tool data and verify power, ground, and control circuits
5. Verify mechanical operation before condemning an actuator, module, transmission, or assembly

Likely Repairs & Cost Guides

Confirm the repair path before pricing parts.

Related OBD Codes

Browse nearby codes when systems overlap.

Next Steps

Move from code to checks, then estimate.